How to maintain solar street lights?
2021-06-09
pudesolar regularly checks whether there are dust, fallen leaves and other obstructions on the solar panel of the solar street light. Once this happens, it must be resolved in time to ensure that sufficient light source can be absorbed every time and the photoelectric conversion rate can be maintained.
The internal fittings of the solar street lamp should be inserted tightly and firmly to avoid failure caused by loose wind pendulum and poor contact. Solar street light fixtures and lamp poles, lamp poles and cantilevers are reliably fixed. Do not let hard or sharp objects hit the solar panel, otherwise the solar panel will be damaged. The solar panels need to be cleaned regularly during use. Keep the surface clean, otherwise it will affect the conversion efficiency. Do not let something block the surface during use, otherwise it will affect the conversion efficiency.
Regularly remove the dust on the surface of the solar panel. The solar panel is the source of electricity in the solar street light system. If the power generation of the solar street light panel is affected, it will inevitably affect the lighting of the solar street light. During the long-term use of solar panels, bird droppings, leaves, dust, etc. will accumulate on them, if these are not removed in time. Originally, the power generated by the solar panel was sufficient, but now the power generation efficiency is only 60% of the original, which will cause the battery to feed power, which will affect the service life and lighting conditions of the entire lamp.
The maintenance of the solar battery mainly includes the idea of anti-theft, and the second is to check whether the charging and discharging of the solar street light system is normal-you can refer to the working state of the solar street light controller for preliminary judgment. Daily inspection of solar street light sources. This is relatively simple. First of all, it is necessary to strictly prohibit the impact of hard objects and sharp objects. At the same time, always check the working status of the light source. Rural solar street lights should be repaired in time if individual lamp beads are found to be off. To avoid damage to the entire lamp. Because the solar street light controller and related circuits are installed inside, it is easy to cause short circuit and damage after rainwater enters, and the wires are easily broken because of the opening, which seriously affects the life of the solar street light system.
Zhongshan Pude Lighting Technology Co., Ltd.
Main solar street light/solar integrated street light/solar split street light/solar garden light/solar flood light
Zhongshan Pude Lighting Technology Co., Ltd. is currently one of the large-scale professional street lighting manufacturers in China, and the preferred supplier for many road lighting and new rural lighting projects. Main products: solar street lights, solar flood lights, stadium lights, landscape lights, courtyard lights, lawn lights, column head lights, wall lights and more than 1,000 design products. If you need more information about solar lights, please contact us.