Garden lights introduction

With the development of the times, people's definition of beauty is getting higher and higher, but the good-looking and high-quality things are often slightly more expensive. Take the pole of the courtyard lamp, there are roughly three materials, aluminum courtyard lamp , Iron garden lights, steel garden lights; because of the different materials, the craftsmanship, molds and construction period used in the production are also slightly different, and the results achieved are also different. If we want to say which is better, we should also combine the needs of customers For example, if the customer likes European style, then choose cast aluminum or cast iron. If the customer pays attention to firmness and quality, then choose steel garden lights.

1. From the perspective of firmness, aluminum has a low boiling point, strong flexibility, and is easily deformed under high temperature, and its firmness is slightly poor. It is generally not recommended to be used in areas with large wind and sand; steel materials are relatively firm, and steel materials The wall thickness can be increased, the stability is high, the supporting force is strong, the wind resistance is up to 36km/s, and the earthquake resistance is above 8.8.
2. From the perspective of the price of courtyard lights, the production process of cast aluminum is complicated, and the material cost is relatively expensive. Cast aluminum materials can create diversified styles, so it is normal that the price is several times higher than that of steel courtyard lights. Although the material of cast aluminum can be used to create different styles, it is not possible to completely negate the steel courtyard lights. The landscape courtyard lights made of steel materials on the market are also very beautiful. Relatively speaking, as long as you combine your own needs, you can definitely choose To your ideal garden light
3. From the point of view of workmanship, the workmanship of cast aluminum and cast iron is much more complicated than that of steel materials; we analyze the subject of aluminum. Various patterns are engraved on the poles, and after they are dried, they are galvanized and sprayed. In this way, the construction period and complexity are more than that of steel materials; compared to steel materials, only steel plates need to be cut by a shearing machine. The required conical plates are then rolled into a light pole by a plate rolling machine at a time, and then welded, polished and other processes are used to make them look more beautiful. After completion, they are galvanized and sprayed.